The welded reinforcing mesh is produced from cold-rolled wire with a diameter of Ф 5.5 – Ф 12 mm. It is used in construction: high-rise construction (foundations, slabs, walls, stairs),
civil engineering (roads, bridges, retaining walls, tunnels), hydraulic engineering (dams, canals), etc.
Note: In addition to the Q and R type of mesh given in the table below, we can produce mesh in accordance with the customer’s request.
Trgovir d.o.o. performs factory control of production and testing of reinforcing mesh in accordance with HRN EN 10080:2012; and HRN 1130:2008 standards. The steel quality mark of the reinforcing mesh is B500A.
BOTH SIDE-BEARING MESHES (Q-MESHES)
| Label of the meshes | Wire diameter (mm) |
Wire distance (mm) |
Mass (kg/piece.) |
Length mesh |
Width mesh |
Number of pieces in the link |
| Q92 | 4,0 x 4,0 | 150 x 150 | 17,00 | 6000 | 2150 | 50 |
| Q131 | 5,0 x 5,0 | 159 x 150 | 26,5 | 6000 | 2150 | 50 |
| Q188 | 6,0 x 6,0 | 150 x 150 | 38,00 | 6000 | 2150 | 50 |
| Q196 | 5,0 x 5,0 | 100 x 100 | 40,60 | 6000 | 2150 | 50 |
| Q257 | 7,0 x 7,0 | 150 x 150 | 52,00 | 6000 | 2150 | 30 |
| Q283 | 6,0 x 6,0 | 100 x 100 | 57,00 | 6000 | 2150 | 30 |
| Q295 | 7,5 x 7,5 | 150 x 150 | 62,00 | 6000 | 2150 | 30 |
| Q335 | 8,0 x 8,0 | 150 x 150 | 68,60 | 6000 | 2150 | 30 |
| Q385 | 7,0 x 7,0 | 100 x 100 | 78,90 | 6000 | 2150 | 30 |
| Q424 | 9,0 x 9,0 | 150 x 150 | 86,00 | 6000 | 2150 | 20 |
| Q503 | 8,0 x 8,0 | 100 x 100 | 102,00 | 6000 | 2150 | 20 |
| Q524 | 10,0 x 10,0 | 150 x 150 | 106,00 | 6000 | 2150 | 20 |
| Q785 | 10,0 x 10,0 | 100 x 100 | 159,00 | 6000 | 2150 | 12 |
LONGITUDINAL BEARING MESH (R-mesh)
| Label of the meshes | Wire diameter (mm) |
RWire distance (mm) |
Mass (kg/kom.) |
Length mreže |
Width mreže |
Number of pieces in the link |
| R 92 | 4,0 x 4,0 | 150 x 250 | 14,00 | 6000 | 2150 | 50 |
| R 131 | 5,0 x 4,0 | 150 x 250 | 18,60 | 6000 | 2150 | 50 |
| R 188 | 6,0 x 4,0 | 150 x 250 | 25,00 | 6000 | 2150 | 50 |
| R 257 | 7,0 x 5,0 | 150 x 250 | 35,00 | 6000 | 2150 | 50 |
| R 295 | 7,5 x 5,0 | 150 x 250 | 39,50 | 6000 | 2150 | 30 |
| R 335 | 8,0 x 5,0 | 150 x 250 | 43,00 | 6000 | 2150 | 50 |
| R 424 | 9,0 x 5,0 | 150 x 250 | 52,50 | 6000 | 2150 | 30 |
| R 524 | 10,0 x 5,0 | 150 x 250 | 62,00 | 6000 | 2150 | 30 |